Click image to view full size image
1. Specification of the material
| 1 | Suitable Material | Colored Steel plate, Galvanized steel |
| 2 | Width of the raw material | 1000mm |
| 3 | Thickness | 0.4-0.6mm |
2. Machine Detailed Parameters
| 1 | Roll Forming Machine | YX25-161-805
|
| 2 | Machine structure
| Wall panel structure
|
| 3 | Total power | Motor power-5.5kw Hydraulic power-5.5kw |
| 4 | Roller stations
| about 14 stations |
| 5 | Productivity
| 2-4m/min |
| 6 | Drive system
| By chain |
| 7 | Diameter of shaft
| 70mm solid shaft |
| 8 | Voltage
| 380v 50Hz 3phase |
| 9 | Color Of The Machine
| Yellow and blue |
| 10 | Container need
| 40GP container |
| 11 | Deliver Time
| 70 days |
| 12 | Terms Of Payment
| 30%T/T 70% pay before shipment |
3. Profile drawing
4. The Chart of Process Flow
5. Specification of Components
(1) 5T Manual Un-coiler
- Width of feeding: 1250mm
- Capability: 5 Ton
- Inter diameter: 500-590mm
- Maximal out diameter: 1500mm
- Mode of expand &fight: inner expand &fight by manual
- Way of feeding: manual
(2) Main Roll Forming Machine
- Roller material:ASTM1045 chrome plated surface with chrome
- Shaft diameter: 70mm material: SAE1045 with quenching and tempering
- Main frame by 350H beam welding
- Machine structure: wall panel
(3)Pressing system:
- Pressing after forming: Press the sheet after roll forming to required length
- Hydraulic drive uses the same hydraulic unit with cutting
- Material of mold:Cr12, 58-62 HRC hardness
- Pressing by hydraulic, 5.5KW
(4) Hydraulic cutting system
- Cutting after forming: Cut the sheet after roll forming to required length
- Uses two hydraulic cylinders for operation.
- Material of blade:Cr12, 58-62 HRC hardness
- Cutting power by hydraulic,5.5KW
- Work
Chain Drive Glazed Tile Roll Forming Machine With Manual Decoiler 2-4m/min Productivity
